Comfort at last. For 1987 and later Concours. These
"bar backs" rotate the grips 2" closer to you. Handlebar
risers (BST risers or other brands) are required to
utilize these modified bars. (Order C-02105 for
your bars to be machined.)
Your bars are machined and returned to you in 1-2
business days after receipt in our shop. The bars
can be returned to the Factory position. Engraved covers
are provided to cover the mounting bolt area at the base
of the bars.
INSURE your bars when sending them to us, as new
ones cost over $400.00/pair.
must have BST, Lightning, GenMar or KB risers installed
to do this test.
NOT RIDE THE MOTORCYCLE UNTIL YOUR BARS
ARE RETURNED TO THE ORIGINAL POSITIONS AND
ALL BOLTS ARE SECURED TO FACTORY
Loosen the pinch bolt on each bar.
Remove the 2 bolts at the base of each bar that locate it
on the triple tree.
Rotate your bars toward you (when seated on the bike), so
that the bar's closest hole is located between the 2
holes in the riser. Snug up the pinch bolts.
the "ZG" bar position.
many times have you wished you could get something out of
a fairing pocket (ear plugs, tire gauge, side stand
plate, windshield cleaner, etc.) without having to take
your key out of the ignition switch first?
!#%&+! Help is just a mouse click
you can remove your lock from the compartment cover (the
directions tell you how), and follow the included
instructions, in a few minutes you will have easy access
to your fairing pocket after installing the parts in
this kit. This item sure isn't rocket science,
but it is something you'll appreciate nearly every
time you ride. Nothing to rust, as the hardware is
stainless steel, per my usual practice.